In-Line Magnetic Separators

The Keller in-line magnetic separators are ideal for metalworking operations machining cast iron or steel.

Advantages:

  • Powerful 5000 Gauss Rare Earth Magnets
  • Flow Rates to 50 GPM
  • Filtration down to 10 Microns
  • Inexpensive: Unique Assemblies Utilize Standard Filter Housings

Applications:

The Keller in-line magnetic separators are ideal for metalworking operations machining cast iron or steel.

Magnetic Assemblies with Plastic Housings

Part #MaterialsPort SizeElement LengthMax. PressurePrice
050A-MAG-102Polypro./SAN1/2”5”125 psi$395.00
050B-MAG-102Polypro1/2”5”125 psi$395.00
Part #MaterialsPort SizeElement LengthMax. PressurePrice
075A-MAG-102Polypro./SAN3/4”10”125 psi$655.00
075B-MAG-102Polypro3/4”10”125 psi$655.00
Part #MaterialsPort SizeElement LengthMax. PressurePrice
075B20-MAG-102Polypro3/4”20”125 psi$1,275.00

Magnetic Assemblies with Stainless Housings

Part #MaterialsPort SizeElement LengthMax. PressurePrice
XS050-MAG-102304SS/Brass1/2”5”300 psi$695.00
XS075-MAG-102304SS/Brass3/4”10”300 psi$975.00
XS100-MAG-102304SS/Brass1”10”300 psi$975.00
XS102-MAG-102304SS/Brass1”20”300 psi$1,575.00

Magnetic Elements Only

(Fits standard housings without modification)

Part #Element LengthPrice
R05-MAG-1025”$350.00
R10-MAG-10210”$595.00
R20-MAG-10220”$1,175.00
PLACE ORDER

More Information

Get These Benefits:

  • Powerful Rare Earth Magnets
  • Ideal For Water-Base Lubricants or Straight Oils
  • Flow Rates to 50 gpm
  • Two Different Magnetic Strength Rods Available
  • Inexpensive: Unique Assemblies Utilize Standard Filter Housings

The Keller in-line magnetic separators are ideal for metalworking operations machining cast iron or steel. Install a magnetic separator:

  1. lnline downstream from the coolant pump on a CNC machine.
  2. On a Keller TKO pump/skimmer unit as a prefilter to reduce solids loading on the cartridge filter.
  3. To remove chips from a sump continuously in an external pumping circuit. Consult Keller for recommendations.

How It Works

Contaminated fluid flows past the pair of cylindrical magnets. The 2000 Gauss or 5000 Gauss rare earth magnets can attract even submicron particles of iron or steel. The fluid enters through the flow passage between the two magnets and the clean fluid exits through the discharge port of the housing, with very low pressure drop. To clean, remove the magnetic assembly from the housing. Scrape the collected chips into a disposal drum. Cleaning time: about 1 minute per magnet.

First, select the strength magnetic rod that satisfies the application requirements. For moderate solids loading, choose the economical ½ diameter magnetic rods rated at 2000 Gauss each. For heavy solids loading, select the 1″ diameter magnetic rods rated at 5000 Gauss each. Magnetic assemblies are supplied to fit standard nominal 10″ filter cartridge housings. Select below from the housing assemblies supplied by Keller Products, or purchase a magnetic assembly for use in any other 10″ filter housing.

Order Request Form

Please fill out the form below to request an order.